Troubleshooting Your Gas Tankless Water Heater

Water Heater Repair isn’t always the best choice for the most part; most modern water heaters require only replacing after ten years. It’s just not worth it to pay for all that wear and tear. Space heaters make up the most significant energy hog in most homes, especially during cold weather. Energy Star ratings can help you determine which space heater will save you the most money. But there are other things to consider besides energy efficiency.water heater

One easy fix to your Salt Lake City Water Heater Repair needs is to use a dip tube to test for leaks. These are easy to find, and you may already have one around the house. Just be sure to keep them tucked away out of the reach of children and pets. A good dip tube test for leaks is to place the tip of it against the bottom of your hot water pipes. If the water drips out, then there are no leaks. If it shoots out and dribbles, then you do have a leaky pipe.

Another easy step to take when thinking of water heater repair is to replace it with one of the many newer models that are much easier to maintain. Tankless units, including those with combi boilers, make for a great upgrade. They’re more energy efficient and eliminate the guesswork completely. They also are much less expensive than the old tanks were, and they heat much more effectively, providing a constant hot water source even when you don’t have hot water available. Some older units may also require hot water installation, which can be pricey.

If electric water heaters are the ones that are currently in use in your home, they need to be inspected every so often for cracks or other damage. These units can be quite delicate, but with a little bit of maintenance and attention to detail, they can last years longer. Although they are smaller than most tankless models, they can still suffer from quite a few repair repairs, including motors and other components. When a part is causing a problem, you need to first identify the problem. If you know it’s an electrical issue, then you can usually take care of it yourself.

If your pilot light or other element is smoking or wobbly, it could mean there’s a problem with your water heaters. Pilot lights are used to turn on and off your tankless unit, and you will most likely notice them flicker from time to time. If you have a gas pilot, then this flicker may also mean that your gas line has been tampered with or burned. Although they are not as easy to detect as a tankless heater, pilot issues are always worth checking out.

If you’re having trouble with one of your natural gas supply heaters, then the first thing to try is turning off the power at the breaker panel and starting the unit up. The following video shows you how to relight a pilot light with the click of a button. Although this process may seem simple, it is important to follow the instructions carefully, because failure to do so can result in permanent damage. The video also shows you the proper way to place the thermostat and other plumbing materials in order to prevent any further damage to your heater.

If none of these basic methods help to relieve the problem, then you should check the gas supply to make sure that it’s not leaking. If it is, then you should inspect the pilot tube and relieve any blockages that you find. If you find no leaks, then you should inspect the main relief valve for any debris, which can cause the heater to fail. Now that you understand why you’re having issues starting your heater, the next step is to learn how to troubleshoot your unit yourself. The following video gives you tips on safely removing and installing a natural gas supply line, and then using the natural gas supply line to help fix the problems.